AgiBot A2 vs Booster T1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
AgiBot A2 or Booster T1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 46 measurements both robots publish, the printed values differ on 29 and are identical on 17.
15 of them are one number against another — AgiBot A2 prints the higher figure on 14, Booster T1 on 1 — and the other 14 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, AgiBot A2 is 43% higher at against Booster T1's .
On weight, AgiBot A2 is 2.3× higher at against Booster T1's .
On degrees of freedom, AgiBot A2 publishes and Booster T1 .
AgiBot A2 and Booster T1 have figures their sources state as a bound rather than an exact value, so those gaps are not like-for-like.
AgiBot A2 publishes data generated — — and Booster T1 does not.
Booster T1 publishes depth method — — and AgiBot A2 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 29 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | AgiBot A2 | Booster T1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +43% AgiBot A2 | ||
| Weight31 of 31 robots publish one | 2.3× AgiBot A2 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | 6.6× AgiBot A2 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
AgiBot A2
AgiBot A2 is a mass production bipedal humanoid from AgiBot, designed in China. Its page publishes 72 of 195 sourced specifications, 1 of them from the maker.
Booster T1
Booster T1 is a prototype bipedal humanoid from Booster Robotics, designed in China. Its page publishes 64 of 195 sourced specifications, 12 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | AgiBot A2 AgiBot 72/195 published | Booster T1 Booster Robotics 64/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | ||
| Depth (values differ) | ||
| Weight (values differ) | ||
| Leg length (values differ) | not published | |
| Arm length (values differ) | not published |
Joints
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | not published | |
| DoF head | ||
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | not published | |
| Encoder type | ||
| Cooling (values differ) | not published |
Load
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Rated payload (values differ) | ||
| Peak payload (values differ) | not published | |
| Payload per arm (values differ) |
Hands
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Tactile sensing (values differ) | not published | |
| Hand sensors (values differ) | not published |
Mobility
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery (values differ) | not published | |
| Navigation (values differ) | not published |
Power
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Battery capacity (values differ) | ||
| Battery voltage (max) (values differ) | not published | |
| Battery energy (values differ) | ||
| Battery swap (values differ) | not published | |
| Charge time (values differ) | not published | |
| Charger input voltage (values differ) | not published | |
| Charger output voltage (values differ) | not published | |
| Charger output current (values differ) | not published | |
| Runtime | ||
| Duty hours per day (values differ) | not published |
Perception
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Sensors (values differ) | ||
| Camera count (values differ) | not published | |
| Depth method (values differ) | not published | |
| LiDAR (values differ) | ||
| IMU axes (values differ) | not published | |
| Microphones (values differ) |
Compute
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute | ||
| AI compute metric |
Connectivity
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published | |
| Cellular (values differ) | not published |
Software
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Robot OS (values differ) | ||
| Middleware | ||
| SDK languages (values differ) | not published | |
| SDK link (values differ) | ||
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | not published | |
| OTA updates | ||
| Open to developers | ||
| Mobile app (values differ) | not published | |
| Handheld controller |
Autonomy
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method (values differ) | ||
| Multi-robot coordination (values differ) | not published | |
| Voice interaction | ||
| Teleoperation interfaces (values differ) | not published |
Safety
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Emergency stop (values differ) | not published |
Privacy
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Data generated (values differ) | not published |
Commercial
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | ||
| Warranty (values differ) | not published |
Overview
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Stage (values differ) | ||
| Locomotion | ||
| User type (values differ) | ||
| Applications (values differ) | ||
| Announced | ||
| Available from | ||
| Price status (values differ) | ||
| Autonomy claim (values differ) | not published | |
| Designed in | ||
| Made in | ||
| Generation (values differ) | not published | |
| Predecessor (values differ) | ||
| Logo (values differ) | not published |
Compliance
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Standards claimed (values differ) | not published |
Organization
| Spec | AgiBot A2 | Booster T1 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Total funding (USD) (values differ) | not published |