Booster T1 vs Unitree G1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
Booster T1 or Unitree G1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 57 measurements both robots publish, the printed values differ on 32 and are identical on 25.
17 of them are one number against another — Booster T1 prints the higher figure on 9, Unitree G1 on 8 — and the other 15 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree G1 is 12% higher at against Booster T1's .
On weight, Unitree G1 is 17% higher at against Booster T1's .
On degrees of freedom, Booster T1 publishes and Unitree G1 .
Booster T1 and Unitree G1 have figures their sources state as a bound rather than an exact value, so those gaps are not like-for-like.
Booster T1 publishes open to developers — — and Unitree G1 does not.
Unitree G1 publishes data generated — — and Booster T1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 32 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | Booster T1 | Unitree G1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +12% Unitree G1 | ||
| Weight31 of 31 robots publish one | +17% Unitree G1 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | 4× Unitree G1 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
Booster T1
Booster T1 is a prototype bipedal humanoid from Booster Robotics, designed in China. Its page publishes 64 of 195 sourced specifications, 12 of them from the maker.
Unitree G1
Unitree G1 is a general availability bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 104 of 195 sourced specifications, 61 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | Booster T1 Booster Robotics 64/195 published | Unitree G1 Unitree Robotics 104/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | ||
| Depth (values differ) | ||
| Weight (values differ) | ||
| Reach (values differ) | not published | |
| Arm span (values differ) | not published | |
| Leg length (values differ) | ||
| Arm length (values differ) | not published | |
| Materials (values differ) | not published |
Joints
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg | ||
| DoF per arm (values differ) | ||
| DoF waist | ||
| DoF head | ||
| Actuator types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | ||
| Encoder type | ||
| Cooling (values differ) | not published | |
| Hollow-shaft cabling (values differ) | not published |
Load
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Tactile sensing (values differ) | not published | |
| Tactile points (values differ) | not published | |
| Minimum detectable force (values differ) | not published | |
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Swappable end effector (values differ) | not published |
Mobility
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery | ||
| Navigation (values differ) | not published |
Power
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | ||
| Battery voltage (nominal) (values differ) | not published | |
| Battery energy (values differ) | ||
| Battery swap (values differ) | not published | |
| Charging method (values differ) | not published | |
| Charge time (values differ) | not published | |
| Charger output voltage (values differ) | not published | |
| Charger output current (values differ) | not published | |
| Runtime |
Perception
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Sensors (values differ) | ||
| Camera FOV (vertical) (values differ) | not published | |
| Depth method | ||
| LiDAR (values differ) | ||
| IMU axes (values differ) | not published | |
| Microphones (values differ) | ||
| Speaker power (values differ) | not published |
Compute
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | ||
| AI compute metric | ||
| Memory (values differ) | not published | |
| Storage (values differ) | not published | |
| Optional compute module (values differ) | not published |
Connectivity
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Wi-Fi | ||
| Bluetooth | ||
| Ethernet ports (values differ) | not published | |
| Aux power outputs (values differ) | not published |
Software
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Robot OS (values differ) | ||
| Middleware | ||
| ROS 2 distros (values differ) | not published | |
| SDK languages | ||
| SDK link (values differ) | ||
| API docs link (values differ) | ||
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers (values differ) | not published | |
| Mobile app | ||
| Handheld controller |
Autonomy
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Multi-robot coordination (values differ) | not published | |
| Voice interaction | ||
| Teleoperation interfaces (values differ) |
Safety
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Emergency stop |
Environment
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| IP rating (values differ) | not published |
Privacy
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Data generated (values differ) | not published |
Security
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Vulnerability disclosure link (values differ) | not published |
Compliance
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations (values differ) | not published |
Commercial
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | ||
| Warranty (values differ) |
Overview
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Stage (values differ) | ||
| Locomotion | ||
| User type | ||
| Applications (values differ) | ||
| Announced | ||
| Available from | ||
| Price status (values differ) | ||
| Designed in | ||
| Made in | ||
| Generation (values differ) | not published | |
| Predecessor (values differ) | ||
| Logo (values differ) | not published |
Organization
| Spec | Booster T1 | Unitree G1 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Total funding (USD) (values differ) |