Booster T1 vs Figure 03
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
Booster T1 or Figure 03? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 32 measurements both robots publish, the printed values differ on 23 and are identical on 9.
8 of them are one number against another — Booster T1 prints the higher figure on 0, Figure 03 on 8 — and the other 15 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Figure 03 is 47%46% higher at against Booster T1's .
On weight, Figure 03 is 2× higher at against Booster T1's .
On degrees of freedom, Booster T1 publishes and Figure 03 .
Booster T1 has figures its sources state as a bound rather than an exact value, so those gaps are not like-for-like.
Booster T1 publishes DoF per arm — — and Figure 03 does not.
Figure 03 publishes data generated — — and Booster T1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 23 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | Booster T1 | Figure 03 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +47%+46% Figure 03 | ||
| Weight31 of 31 robots publish one | 2× Figure 03 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | 2.4× Figure 03 | ||
| Runtime31 of 31 robots publish one | 2.5× Figure 03 |
What each one is
from each robot's own published columns
Booster T1
Booster T1 is a prototype bipedal humanoid from Booster Robotics, designed in China. Its page publishes 64 of 195 sourced specifications, 12 of them from the maker.
Figure 03
Figure 03 is a prototype bipedal humanoid from Figure AI, designed in United States. Its page publishes 69 of 195 sourced specifications, 34 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | Booster T1 Booster Robotics 64/195 published | Figure 03 Figure AI 69/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Leg length (values differ) | not published | |
| Arm length (values differ) | not published | |
| Materials (values differ) | not published |
Joints
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | not published | |
| DoF per arm (values differ) | not published | |
| DoF waist (values differ) | not published | |
| DoF head (values differ) | not published | |
| Actuator types (values differ) | not published | |
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | not published | |
| Joint torque (per joint) (values differ) | not published | |
| Joint range (per joint) (values differ) | not published | |
| Encoder type (values differ) | not published | |
| Cooling (values differ) | not published |
Load
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Rated payload (values differ) | ||
| Peak payload (values differ) | not published | |
| Payload per arm (values differ) | not published |
Hands
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Tactile sensing (values differ) | not published | |
| Minimum detectable force (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Swappable end effector (values differ) | not published |
Mobility
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery | ||
| Navigation (values differ) | not published |
Power
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Battery capacity (values differ) | not published | |
| Battery energy (values differ) | ||
| Battery swap (values differ) | not published | |
| Charging method (values differ) | not published | |
| Charge power (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Sensors (values differ) | ||
| Camera count (values differ) | not published | |
| Depth method | ||
| LiDAR | ||
| IMU axes (values differ) | not published | |
| Microphones (values differ) | not published | |
| Displays (values differ) | not published |
Compute
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published |
Connectivity
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published |
Software
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Robot OS (values differ) | ||
| Middleware (values differ) | not published | |
| SDK languages (values differ) | not published | |
| SDK link (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | not published | |
| OTA updates | ||
| Open to developers (values differ) | not published | |
| Mobile app (values differ) | not published | |
| Handheld controller (values differ) | not published |
Autonomy
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Fleet learning (values differ) | not published | |
| Multi-robot coordination (values differ) | not published | |
| Voice interaction | ||
| Teleoperation interfaces (values differ) |
Safety
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Emergency stop (values differ) | not published | |
| Pinch-free design (values differ) | not published |
Privacy
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Cloud dependency (values differ) | not published | |
| Data generated (values differ) | not published |
Service
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Field service (values differ) | not published | |
| Field-replaceable modules (values differ) | not published | |
| Customer self-repair (values differ) | not published | |
| Fleet software (values differ) | not published |
Home
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Washable cover (values differ) | not published | |
| Home features (values differ) | not published |
Commercial
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | ||
| Warranty (values differ) | not published |
Overview
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Stage | ||
| Locomotion | ||
| User type (values differ) | ||
| Applications (values differ) | ||
| Announced (values differ) | ||
| Available from (values differ) | ||
| Price status (values differ) | ||
| Autonomy claim (values differ) | not published | |
| Designed in (values differ) | ||
| Made in (values differ) | ||
| Generation (values differ) | not published | |
| Predecessor (values differ) | ||
| Logo (values differ) | not published |
Compliance
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Standards claimed (values differ) | not published |
Organization
| Spec | Booster T1 | Figure 03 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Total funding (USD) (values differ) |