Booster T1 vs Unitree H1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
Booster T1 or Unitree H1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 51 measurements both robots publish, the printed values differ on 34 and are identical on 17.
17 of them are one number against another — Booster T1 prints the higher figure on 5, Unitree H1 on 12 — and the other 17 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree H1 is 53% higher at against Booster T1's .
On weight, Unitree H1 is 57% higher at against Booster T1's .
On degrees of freedom, Booster T1 publishes and Unitree H1 .
Unitree H1 and Booster T1 have figures their sources state as a bound rather than an exact value, so those gaps are not like-for-like.
Booster T1 publishes stage — — and Unitree H1 does not.
Unitree H1 publishes data generated — — and Booster T1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 34 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | Booster T1 | Unitree H1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +53% Unitree H1 | ||
| Weight31 of 31 robots publish one | +57% Unitree H1 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | 6.6× Unitree H1 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
Booster T1
Booster T1 is a prototype bipedal humanoid from Booster Robotics, designed in China. Its page publishes 64 of 195 sourced specifications, 12 of them from the maker.
Unitree H1
Unitree H1 is a bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 81 of 195 sourced specifications, 42 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | Booster T1 Booster Robotics 64/195 published | Unitree H1 Unitree Robotics 81/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | ||
| Depth (values differ) | ||
| Weight (values differ) | ||
| Leg length (values differ) | ||
| Arm length (values differ) | ||
| Materials (values differ) | not published |
Joints
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | ||
| DoF per arm | ||
| DoF waist | ||
| DoF head (values differ) | not published | |
| DoF wrist (values differ) | not published | |
| Actuator types (values differ) | not published | |
| Torque density (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | not published | |
| Encoder type | ||
| Hollow-shaft cabling (values differ) | not published |
Load
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Swappable end effector (values differ) | not published |
Mobility
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery (values differ) | not published | |
| Navigation (values differ) | not published |
Power
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | ||
| Battery voltage (max) (values differ) | not published | |
| Battery energy (values differ) | ||
| Battery swap (values differ) | not published | |
| Charging method (values differ) | not published | |
| Charge time (values differ) | not published | |
| Runtime |
Perception
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Sensors (values differ) | ||
| Depth method (values differ) | ||
| LiDAR (values differ) | ||
| IMU axes (values differ) | not published | |
| Microphones (values differ) | not published |
Compute
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | ||
| AI compute metric | ||
| Optional compute module (values differ) | not published |
Connectivity
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published |
Software
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Robot OS (values differ) | ||
| Middleware (values differ) | ||
| ROS 2 distros (values differ) | not published | |
| SDK languages (values differ) | ||
| SDK link (values differ) | ||
| API docs link (values differ) | ||
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers | ||
| Mobile app | ||
| Handheld controller |
Autonomy
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Multi-robot coordination (values differ) | not published | |
| Voice interaction | ||
| Teleoperation interfaces (values differ) |
Safety
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Emergency stop (values differ) | not published |
Privacy
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Data generated (values differ) | not published |
Security
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Vulnerability disclosure link (values differ) | not published |
Compliance
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations (values differ) | not published |
Commercial
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in | ||
| Warranty (values differ) | not published |
Overview
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Stage (values differ) | not published | |
| Locomotion | ||
| User type | ||
| Applications | ||
| Announced (values differ) | ||
| Available from (values differ) | ||
| Price status (values differ) | ||
| Autonomy claim (values differ) | not published | |
| Designed in | ||
| Made in | ||
| Predecessor (values differ) | not published | |
| Logo (values differ) | not published |
Organization
| Spec | Booster T1 | Unitree H1 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Employees (values differ) | not published | |
| Total funding (USD) (values differ) |