Booster T1 vs Unitree H2
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
Booster T1 or Unitree H2? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 53 measurements both robots publish, the printed values differ on 36 and are identical on 17.
20 of them are one number against another — Booster T1 prints the higher figure on 4, Unitree H2 on 16 — and the other 16 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree H2 is 54% higher at against Booster T1's .
On weight, Unitree H2 is 2.3× higher at against Booster T1's .
On degrees of freedom, Booster T1 publishes and Unitree H2 .
Booster T1 and Unitree H2 have figures their sources state as a bound rather than an exact value, so those gaps are not like-for-like.
Booster T1 publishes depth method — — and Unitree H2 does not.
Unitree H2 publishes data generated — — and Booster T1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 36 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | Booster T1 | Unitree H2 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +54% Unitree H2 | ||
| Weight31 of 31 robots publish one | 2.3× Unitree H2 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | 4× Unitree H2 | ||
| Runtime31 of 31 robots publish one | +50% Unitree H2 |
What each one is
from each robot's own published columns
Booster T1
Booster T1 is a prototype bipedal humanoid from Booster Robotics, designed in China. Its page publishes 64 of 195 sourced specifications, 12 of them from the maker.
Unitree H2
Unitree H2 is a prototype bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 79 of 195 sourced specifications, 41 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | Booster T1 Booster Robotics 64/195 published | Unitree H2 Unitree Robotics 79/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | ||
| Depth (values differ) | ||
| Weight (values differ) | ||
| Leg length (values differ) | ||
| Arm length (values differ) | ||
| Materials (values differ) | not published |
Joints
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | ||
| DoF head | ||
| Actuator types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | not published | |
| Encoder type (values differ) | not published | |
| Cooling (values differ) | not published |
Load
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Rated payload (values differ) | ||
| Peak payload (values differ) | not published | |
| Lift capacity (values differ) | not published | |
| Payload per arm (values differ) |
Hands
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Hand active DoF (values differ) | not published | |
| Fingertip force (values differ) | not published | |
| Grip force (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Hand weight (values differ) | not published |
Mobility
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery (values differ) | not published | |
| Navigation (values differ) | not published |
Power
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | ||
| Battery voltage (max) (values differ) | not published | |
| Battery energy (values differ) | ||
| Battery swap (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Sensors (values differ) | ||
| Depth method (values differ) | not published | |
| LiDAR | ||
| IMU axes (values differ) | not published | |
| Microphones (values differ) |
Compute
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | ||
| AI compute metric | ||
| Optional compute module (values differ) | not published |
Connectivity
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Wi-Fi | ||
| Bluetooth |
Software
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Robot OS (values differ) | ||
| Middleware (values differ) | ||
| SDK languages (values differ) | ||
| SDK link (values differ) | not published | |
| API docs link (values differ) | ||
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers | ||
| Mobile app | ||
| Handheld controller |
Autonomy
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method (values differ) | ||
| Voice interaction | ||
| Teleoperation interfaces (values differ) | not published |
Safety
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Emergency stop (values differ) |
Privacy
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Data generated (values differ) | not published |
Security
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Vulnerability disclosure link (values differ) | not published |
Compliance
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Integrations (values differ) | not published |
Commercial
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in | ||
| Warranty (values differ) |
Overview
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Stage | ||
| Locomotion | ||
| User type | ||
| Applications (values differ) | ||
| Announced (values differ) | ||
| Available from (values differ) | ||
| Price status (values differ) | ||
| Designed in | ||
| Made in | ||
| Generation (values differ) | not published | |
| Predecessor (values differ) | ||
| Logo (values differ) | not published |
Organization
| Spec | Booster T1 | Unitree H2 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Total funding (USD) (values differ) |