Figure 03 vs Unitree H2
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
Figure 03 or Unitree H2? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 37 measurements both robots publish, the printed values differ on 31 and are identical on 6.
10 of them are one number against another — Figure 03 prints the higher figure on 5, Unitree H2 on 5 — and the other 21 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree H2 is 5.2%5.4% higher at against Figure 03's .
On weight, Unitree H2 is 15% higher at against Figure 03's .
On degrees of freedom, Figure 03 is 42% higher at against Unitree H2's .
Unitree H2 has figures its sources state as a bound rather than an exact value, so those gaps are not like-for-like.
Figure 03 publishes depth method — — and Unitree H2 does not.
Unitree H2 publishes DoF per arm — — and Figure 03 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 31 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | Figure 03 | Unitree H2 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +5.2%+5.4% Unitree H2 | ||
| Weight31 of 31 robots publish one | +15% Unitree H2 | ||
| Degrees of freedom31 of 31 robots publish one | +42% Figure 03 | ||
| Max speed31 of 31 robots publish one | +67% Unitree H2 | ||
| Runtime31 of 31 robots publish one | +67% Figure 03 |
What each one is
from each robot's own published columns
Figure 03
Figure 03 is a prototype bipedal humanoid from Figure AI, designed in United States. Its page publishes 69 of 195 sourced specifications, 34 of them from the maker.
Unitree H2
Unitree H2 is a prototype bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 79 of 195 sourced specifications, 41 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | Figure 03 Figure AI 69/195 published | Unitree H2 Unitree Robotics 79/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Leg length (values differ) | not published | |
| Arm length (values differ) | not published | |
| Materials (values differ) |
Joints
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | not published | |
| DoF per arm (values differ) | not published | |
| DoF waist (values differ) | not published | |
| DoF head (values differ) | not published | |
| Actuator types (values differ) | ||
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | not published | |
| Joint torque (per joint) (values differ) | not published | |
| Cooling (values differ) |
Load
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Rated payload (values differ) | ||
| Peak payload (values differ) | ||
| Lift capacity (values differ) | not published | |
| Payload per arm (values differ) | not published |
Hands
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | ||
| Tactile sensing (values differ) | not published | |
| Minimum detectable force (values differ) | not published | |
| Fingertip force (values differ) | not published | |
| Grip force (values differ) | not published | |
| Hand sensors | ||
| Swappable end effector (values differ) | not published | |
| Hand weight (values differ) | not published |
Mobility
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery (values differ) | not published | |
| Navigation (values differ) |
Power
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | not published | |
| Battery voltage (max) (values differ) | not published | |
| Battery energy (values differ) | ||
| Battery swap (values differ) | ||
| Charging method (values differ) | not published | |
| Charge power (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Sensors (values differ) | ||
| Camera count (values differ) | not published | |
| Depth method (values differ) | not published | |
| LiDAR | ||
| Microphones (values differ) | not published | |
| Displays (values differ) | not published |
Compute
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published | |
| Optional compute module (values differ) | not published |
Connectivity
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published |
Software
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Robot OS (values differ) | ||
| Middleware (values differ) | not published | |
| SDK languages (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | not published | |
| OTA updates | ||
| Open to developers (values differ) | not published | |
| Mobile app (values differ) | not published | |
| Handheld controller (values differ) | not published |
Autonomy
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method (values differ) | ||
| Fleet learning (values differ) | not published | |
| Multi-robot coordination (values differ) | not published | |
| Voice interaction | ||
| Teleoperation interfaces (values differ) | not published |
Safety
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Emergency stop (values differ) | not published | |
| Pinch-free design (values differ) | not published |
Privacy
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Cloud dependency (values differ) | not published | |
| Data generated (values differ) |
Security
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Vulnerability disclosure link (values differ) | not published |
Compliance
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Digital instructions link (values differ) | not published | |
| Standards claimed (values differ) | not published |
Service
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Field service (values differ) | not published | |
| Field-replaceable modules (values differ) | not published | |
| Customer self-repair (values differ) | not published | |
| Fleet software (values differ) | not published | |
| Integrations (values differ) | not published |
Home
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Washable cover (values differ) | not published | |
| Home features (values differ) | not published |
Commercial
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | ||
| Warranty (values differ) | not published |
Overview
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Stage | ||
| Locomotion | ||
| User type (values differ) | ||
| Applications (values differ) | ||
| Announced (values differ) | ||
| Available from (values differ) | ||
| Price status (values differ) | ||
| Autonomy claim (values differ) | not published | |
| Designed in (values differ) | ||
| Made in (values differ) | ||
| Generation (values differ) | ||
| Predecessor (values differ) | ||
| Logo (values differ) |
Organization
| Spec | Figure 03 | Unitree H2 |
|---|---|---|
| Headquarters (values differ) | ||
| Founded (values differ) | ||
| Total funding (USD) (values differ) |