AgiBot X1 vs Booster T1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
AgiBot X1 or Booster T1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 35 measurements both robots publish, the printed values differ on 22 and are identical on 12.
11 of them are one number against another — AgiBot X1 prints the higher figure on 9, Booster T1 on 2 — and the other 11 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, AgiBot X1 is 10% higher at against Booster T1's .
On weight, AgiBot X1 is 10% higher at against Booster T1's .
On degrees of freedom, AgiBot X1 publishes and Booster T1 .
Booster T1's source states that figure as an approximation rather than an exact figure, so the gap is not a like-for-like difference.
On runtime both publish , but Booster T1's source states it as an approximation rather than an exact figure — the same number, stated differently.
AgiBot X1 publishes data generated — — and Booster T1 does not.
Booster T1 publishes available from — — and AgiBot X1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 22 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | AgiBot X1 | Booster T1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +10% AgiBot X1 | ||
| Weight31 of 31 robots publish one | +10% AgiBot X1 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | 2× AgiBot X1 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
AgiBot X1
AgiBot X1 is a prototype bipedal humanoid from AgiBot, designed in China. Its page publishes 55 of 195 sourced specifications, 3 of them from the maker.
Booster T1
Booster T1 is a prototype bipedal humanoid from Booster Robotics, designed in China. Its page publishes 64 of 195 sourced specifications, 12 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | AgiBot X1 AgiBot 55/195 published | Booster T1 Booster Robotics 64/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Leg length (values differ) | not published | |
| Arm length (values differ) | not published | |
| Materials (values differ) | not published |
Joints
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | not published | |
| DoF head | ||
| Actuator types (values differ) | not published | |
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | not published | |
| Encoder type (values differ) | ||
| Hollow-shaft cabling (values differ) | not published |
Load
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Grip force (values differ) | not published | |
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | not published |
Mobility
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing (values differ) | not published | |
| Fall recovery (values differ) | not published |
Power
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Battery capacity (values differ) | not published | |
| Battery voltage (nominal) (values differ) | not published | |
| Battery energy (values differ) | not published | |
| Battery swap (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Sensors (values differ) | ||
| Depth method (values differ) | not published | |
| LiDAR (values differ) | ||
| IMU axes (values differ) | not published | |
| Microphones (values differ) | not published |
Compute
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published |
Connectivity
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published | |
| Fieldbus ports (values differ) | not published |
Software
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Robot OS | ||
| SDK host OS (values differ) | not published | |
| Middleware (values differ) | not published | |
| SDK languages (values differ) | not published | |
| SDK link (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers | ||
| Mobile app | ||
| Handheld controller (values differ) | not published |
Autonomy
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Voice interaction (values differ) | not published | |
| Teleoperation interfaces (values differ) |
Safety
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Emergency stop (values differ) | not published |
Privacy
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Data generated (values differ) | not published |
Security
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Vulnerability disclosure link (values differ) | not published |
Service
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations (values differ) | not published |
Commercial
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | not published | |
| Warranty (values differ) | not published |
Overview
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Stage | ||
| Locomotion | ||
| User type (values differ) | ||
| Applications | ||
| Announced | ||
| Available from (values differ) | not published | |
| Price status (values differ) | ||
| Autonomy claim (values differ) | not published | |
| Designed in | ||
| Made in | ||
| Predecessor (values differ) | not published | |
| Logo (values differ) | not published |
Organization
| Spec | AgiBot X1 | Booster T1 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Total funding (USD) (values differ) | not published |