AgiBot X1 vs Unitree G1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
AgiBot X1 or Unitree G1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 42 measurements both robots publish, the printed values differ on 29 and are identical on 12.
12 of them are one number against another — AgiBot X1 prints the higher figure on 6, Unitree G1 on 6 — and the other 17 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree G1 is 1.5% higher at against AgiBot X1's .
On weight, Unitree G1 is 6.1% higher at against AgiBot X1's .
On degrees of freedom, AgiBot X1 is 48% higher at against Unitree G1's .
Unitree G1's source states that figure as an approximation rather than an exact figure, so the gap is not a like-for-like difference.
On runtime both publish , but Unitree G1's source states it as an approximation rather than an exact figure — the same number, stated differently.
AgiBot X1 publishes open to developers — — and Unitree G1 does not.
Unitree G1 publishes available from — — and AgiBot X1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 29 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | AgiBot X1 | Unitree G1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +1.5% Unitree G1 | ||
| Weight31 of 31 robots publish one | +6.1% Unitree G1 | ||
| Degrees of freedom31 of 31 robots publish one | +48% AgiBot X1 | ||
| Max speed31 of 31 robots publish one | 2×+100% Unitree G1 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
AgiBot X1
AgiBot X1 is a prototype bipedal humanoid from AgiBot, designed in China. Its page publishes 55 of 195 sourced specifications, 3 of them from the maker.
Unitree G1
Unitree G1 is a general availability bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 104 of 195 sourced specifications, 61 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | AgiBot X1 AgiBot 55/195 published | Unitree G1 Unitree Robotics 104/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Reach (values differ) | not published | |
| Arm span (values differ) | not published | |
| Leg length (values differ) | not published | |
| Materials (values differ) |
Joints
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | not published | |
| DoF head | ||
| Actuator types (values differ) | ||
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | not published | |
| Encoder type (values differ) | ||
| Cooling (values differ) | not published | |
| Hollow-shaft cabling |
Load
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Fingers per hand (values differ) | ||
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Tactile sensing (values differ) | not published | |
| Tactile points (values differ) | not published | |
| Minimum detectable force (values differ) | not published | |
| Grip force (values differ) | not published | |
| Hand grasp load (values differ) | ||
| Hand sensors (values differ) | ||
| Swappable end effector (values differ) | not published |
Mobility
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing (values differ) | not published | |
| Fall recovery (values differ) | not published | |
| Navigation (values differ) | not published |
Power
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | not published | |
| Battery voltage (nominal) | ||
| Battery energy (values differ) | not published | |
| Battery swap (values differ) | ||
| Charging method (values differ) | not published | |
| Charge time (values differ) | not published | |
| Charger output voltage (values differ) | not published | |
| Charger output current (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Sensors (values differ) | ||
| Camera FOV (vertical) (values differ) | not published | |
| Depth method (values differ) | not published | |
| LiDAR | ||
| Microphones (values differ) | not published | |
| Speaker power (values differ) | not published |
Compute
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published | |
| Memory (values differ) | not published | |
| Storage (values differ) | not published | |
| Optional compute module (values differ) | not published |
Connectivity
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published | |
| Ethernet ports (values differ) | not published | |
| Fieldbus ports (values differ) | not published | |
| Aux power outputs (values differ) | not published |
Software
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Robot OS (values differ) | ||
| SDK host OS (values differ) | not published | |
| Middleware (values differ) | not published | |
| ROS 2 distros (values differ) | not published | |
| SDK languages (values differ) | not published | |
| SDK link (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets | ||
| OTA updates | ||
| Open to developers (values differ) | not published | |
| Mobile app | ||
| Handheld controller (values differ) | not published |
Autonomy
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Multi-robot coordination (values differ) | not published | |
| Voice interaction (values differ) | not published | |
| Teleoperation interfaces (values differ) |
Safety
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Emergency stop (values differ) | not published |
Environment
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| IP rating (values differ) | not published |
Privacy
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Data generated (values differ) |
Security
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Vulnerability disclosure link (values differ) |
Compliance
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Field-replaceable modules (values differ) | ||
| Integrations (values differ) |
Commercial
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | not published | |
| Warranty (values differ) | not published |
Overview
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Stage (values differ) | ||
| Locomotion | ||
| User type (values differ) | ||
| Applications (values differ) | ||
| Announced | ||
| Available from (values differ) | not published | |
| Price status (values differ) | ||
| Autonomy claim (values differ) | not published | |
| Designed in | ||
| Made in | ||
| Generation (values differ) | not published | |
| Predecessor (values differ) | not published | |
| Logo (values differ) |
Organization
| Spec | AgiBot X1 | Unitree G1 |
|---|---|---|
| Headquarters (values differ) | ||
| Founded | ||
| Total funding (USD) (values differ) | not published |