AgiBot X1 vs Booster T2
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
AgiBot X1 or Booster T2? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 32 measurements both robots publish, the printed values differ on 20 and are identical on 12.
12 of them are one number against another — AgiBot X1 prints the higher figure on 5, Booster T2 on 7 — and the other 8 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Booster T2 is 7.7% higher at against AgiBot X1's .
On weight, Booster T2 is 27% higher at against AgiBot X1's .
On degrees of freedom, AgiBot X1 is 9.7% higher at against Booster T2's .
Booster T2 has figures its sources state as a bound rather than an exact value, so those gaps are not like-for-like.
AgiBot X1 publishes stage — — and Booster T2 does not.
Booster T2 publishes available from — — and AgiBot X1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 20 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | AgiBot X1 | Booster T2 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +7.7% Booster T2 | ||
| Weight31 of 31 robots publish one | +27% Booster T2 | ||
| Degrees of freedom31 of 31 robots publish one | +9.7% AgiBot X1 | ||
| Max speed31 of 31 robots publish one | +94% Booster T2 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
AgiBot X1
AgiBot X1 is a prototype bipedal humanoid from AgiBot, designed in China. Its page publishes 55 of 195 sourced specifications, 3 of them from the maker.
Booster T2
Booster T2 is a bipedal humanoid from Booster Robotics, designed in China. Its page publishes 52 of 195 sourced specifications, 27 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | AgiBot X1 AgiBot 55/195 published | Booster T2 Booster Robotics 52/195 published |
|---|---|---|
| Height (values differ) | ||
| Weight (values differ) | ||
| Materials (values differ) | not published |
Joints
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | not published | |
| DoF head | ||
| Actuator types (values differ) | ||
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Encoder type (values differ) | not published | |
| Cooling (values differ) | not published | |
| Hollow-shaft cabling (values differ) | not published |
Load
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Fingers per hand (values differ) | ||
| Hand DoF (values differ) | not published | |
| Grip force (values differ) | not published | |
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Swappable end effector (values differ) | not published |
Mobility
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing (values differ) | not published | |
| Fall recovery (values differ) | not published |
Power
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Battery capacity (values differ) | not published | |
| Battery voltage (nominal) | ||
| Battery swap (values differ) | not published | |
| Runtime |
Perception
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Sensors (values differ) | ||
| LiDAR |
Compute
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published |
Connectivity
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published | |
| Fieldbus ports (values differ) | not published |
Software
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Robot OS (values differ) | not published | |
| SDK host OS (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | ||
| OTA updates (values differ) | not published | |
| Open to developers | ||
| Mobile app |
Autonomy
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Multi-robot coordination (values differ) | not published | |
| Voice interaction (values differ) | not published | |
| Teleoperation interfaces (values differ) | not published |
Safety
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Emergency stop (values differ) | not published | |
| Safe state on fault (values differ) | not published |
Privacy
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Cloud dependency (values differ) | not published | |
| Data generated (values differ) | not published |
Security
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Vulnerability disclosure link (values differ) | not published |
Service
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations (values differ) |
Commercial
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Price from (USD) (values differ) |
Overview
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Stage (values differ) | not published | |
| Locomotion | ||
| User type | ||
| Applications | ||
| Announced (values differ) | ||
| Available from (values differ) | not published | |
| Price status | ||
| Autonomy claim (values differ) | not published | |
| Designed in | ||
| Made in (values differ) | not published | |
| Logo (values differ) | not published |
Organization
| Spec | AgiBot X1 | Booster T2 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Total funding (USD) (values differ) | not published |