AgiBot X1 vs Unitree H1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
AgiBot X1 or Unitree H1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 41 measurements both robots publish, the printed values differ on 28 and are identical on 12.
12 of them are one number against another — AgiBot X1 prints the higher figure on 3, Unitree H1 on 9 — and the other 16 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree H1 is 38% higher at against AgiBot X1's .
On weight, Unitree H1 is 42%43% higher at against AgiBot X1's .
On degrees of freedom, AgiBot X1 is 26% higher at against Unitree H1's .
Unitree H1 has figures its sources state as a bound rather than an exact value, so those gaps are not like-for-like.
On runtime both publish , but Unitree H1's source states it as an approximation rather than an exact figure — the same number, stated differently.
AgiBot X1 publishes stage — — and Unitree H1 does not.
Unitree H1 publishes available from — — and AgiBot X1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 28 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | AgiBot X1 | Unitree H1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +38% Unitree H1 | ||
| Weight31 of 31 robots publish one | +42%+43% Unitree H1 | ||
| Degrees of freedom31 of 31 robots publish one | +26% AgiBot X1 | ||
| Max speed31 of 31 robots publish one | 3.3× Unitree H1 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
AgiBot X1
AgiBot X1 is a prototype bipedal humanoid from AgiBot, designed in China. Its page publishes 55 of 195 sourced specifications, 3 of them from the maker.
Unitree H1
Unitree H1 is a bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 81 of 195 sourced specifications, 42 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | AgiBot X1 AgiBot 55/195 published | Unitree H1 Unitree Robotics 81/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Leg length (values differ) | not published | |
| Arm length (values differ) | not published | |
| Materials (values differ) |
Joints
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | not published | |
| DoF head (values differ) | not published | |
| DoF wrist (values differ) | not published | |
| Actuator types (values differ) | ||
| Reducer types (values differ) | not published | |
| Torque density (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Encoder type (values differ) | ||
| Hollow-shaft cabling |
Load
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Fingers per hand (values differ) | ||
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Grip force (values differ) | not published | |
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Swappable end effector (values differ) | not published |
Mobility
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing (values differ) | not published | |
| Navigation (values differ) | not published |
Power
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | not published | |
| Battery voltage (nominal) (values differ) | not published | |
| Battery voltage (max) (values differ) | not published | |
| Battery energy (values differ) | not published | |
| Battery swap (values differ) | ||
| Charging method (values differ) | not published | |
| Charge time (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Sensors (values differ) | ||
| Depth method (values differ) | not published | |
| LiDAR |
Compute
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published | |
| Optional compute module (values differ) | not published |
Connectivity
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Wi-Fi | ||
| Fieldbus ports (values differ) | not published |
Software
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Robot OS (values differ) | ||
| SDK host OS (values differ) | not published | |
| Middleware (values differ) | not published | |
| ROS 2 distros (values differ) | not published | |
| SDK languages (values differ) | not published | |
| SDK link (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers | ||
| Mobile app | ||
| Handheld controller (values differ) | not published |
Autonomy
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Multi-robot coordination (values differ) | not published | |
| Voice interaction (values differ) | not published | |
| Teleoperation interfaces (values differ) |
Privacy
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Data generated |
Security
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Vulnerability disclosure link (values differ) |
Compliance
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Field-replaceable modules (values differ) | ||
| Integrations (values differ) |
Commercial
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | not published |
Overview
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Stage (values differ) | not published | |
| Locomotion | ||
| User type (values differ) | ||
| Applications | ||
| Announced (values differ) | ||
| Available from (values differ) | not published | |
| Price status (values differ) | ||
| Autonomy claim (values differ) | ||
| Designed in | ||
| Made in | ||
| Logo (values differ) |
Organization
| Spec | AgiBot X1 | Unitree H1 |
|---|---|---|
| Headquarters (values differ) | ||
| Founded | ||
| Employees (values differ) | not published | |
| Total funding (USD) (values differ) | not published |