AgiBot X1 vs Unitree H2
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
AgiBot X1 or Unitree H2? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 38 measurements both robots publish, the printed values differ on 29 and are identical on 9.
13 of them are one number against another — AgiBot X1 prints the higher figure on 4, Unitree H2 on 9 — and the other 16 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree H2 is 40% higher at against AgiBot X1's .
On weight, Unitree H2 is 2.1× higher at against AgiBot X1's .
On degrees of freedom, AgiBot X1 is 9.7% higher at against Unitree H2's .
Unitree H2 has figures its sources state as a bound rather than an exact value, so those gaps are not like-for-like.
AgiBot X1 publishes teleoperation interfaces — — and Unitree H2 does not.
Unitree H2 publishes available from — — and AgiBot X1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 29 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | AgiBot X1 | Unitree H2 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +40% Unitree H2 | ||
| Weight31 of 31 robots publish one | 2.1× Unitree H2 | ||
| Degrees of freedom31 of 31 robots publish one | +9.7% AgiBot X1 | ||
| Max speed31 of 31 robots publish one | 2×+100% Unitree H2 | ||
| Runtime31 of 31 robots publish one | +50% Unitree H2 |
What each one is
from each robot's own published columns
AgiBot X1
AgiBot X1 is a prototype bipedal humanoid from AgiBot, designed in China. Its page publishes 55 of 195 sourced specifications, 3 of them from the maker.
Unitree H2
Unitree H2 is a prototype bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 79 of 195 sourced specifications, 41 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | AgiBot X1 AgiBot 55/195 published | Unitree H2 Unitree Robotics 79/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Leg length (values differ) | not published | |
| Arm length (values differ) | not published | |
| Materials (values differ) |
Joints
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | not published | |
| DoF head | ||
| Actuator types (values differ) | ||
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Encoder type (values differ) | not published | |
| Cooling (values differ) | not published | |
| Hollow-shaft cabling (values differ) | not published |
Load
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Rated payload (values differ) | ||
| Peak payload (values differ) | not published | |
| Lift capacity (values differ) | not published | |
| Payload per arm (values differ) |
Hands
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Fingertip force (values differ) | not published | |
| Grip force (values differ) | ||
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | ||
| Hand weight (values differ) | not published |
Mobility
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing (values differ) | not published | |
| Navigation (values differ) | not published |
Power
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | not published | |
| Battery voltage (nominal) (values differ) | not published | |
| Battery voltage (max) (values differ) | not published | |
| Battery energy (values differ) | not published | |
| Battery swap (values differ) | ||
| Runtime (values differ) |
Perception
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Sensors (values differ) | ||
| LiDAR (values differ) | ||
| Microphones (values differ) | not published |
Compute
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published | |
| Optional compute module (values differ) | not published |
Connectivity
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published | |
| Fieldbus ports (values differ) | not published |
Software
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Robot OS (values differ) | ||
| SDK host OS (values differ) | not published | |
| Middleware (values differ) | not published | |
| SDK languages (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers | ||
| Mobile app | ||
| Handheld controller (values differ) | not published |
Autonomy
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method (values differ) | ||
| Voice interaction (values differ) | not published | |
| Teleoperation interfaces (values differ) | not published |
Safety
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Emergency stop (values differ) | not published |
Privacy
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Data generated |
Security
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Vulnerability disclosure link (values differ) |
Compliance
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations (values differ) |
Commercial
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | not published | |
| Warranty (values differ) | not published |
Overview
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Stage | ||
| Locomotion | ||
| User type (values differ) | ||
| Applications (values differ) | ||
| Announced (values differ) | ||
| Available from (values differ) | not published | |
| Price status (values differ) | ||
| Autonomy claim (values differ) | not published | |
| Designed in | ||
| Made in | ||
| Generation (values differ) | not published | |
| Predecessor (values differ) | not published | |
| Logo (values differ) |
Organization
| Spec | AgiBot X1 | Unitree H2 |
|---|---|---|
| Headquarters (values differ) | ||
| Founded | ||
| Total funding (USD) (values differ) | not published |