Booster T2 vs Unitree G1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
Booster T2 or Unitree G1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 45 measurements both robots publish, the printed values differ on 26 and are identical on 18.
14 of them are one number against another — Booster T2 prints the higher figure on 13, Unitree G1 on 1 — and the other 12 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Booster T2 is 6.1% higher at against Unitree G1's .
On weight, Booster T2 is 20% higher at against Unitree G1's .
On degrees of freedom, Booster T2 is 35% higher at against Unitree G1's .
Booster T2 and Unitree G1 have figures their sources state as a bound rather than an exact value, so those gaps are not like-for-like.
On runtime both publish , but Unitree G1's source states it as an approximation rather than an exact figure — the same number, stated differently.
Booster T2 publishes open to developers — — and Unitree G1 does not.
Unitree G1 publishes stage — — and Booster T2 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 26 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | Booster T2 | Unitree G1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +6.1% Booster T2 | ||
| Weight31 of 31 robots publish one | +20% Booster T2 | ||
| Degrees of freedom31 of 31 robots publish one | +35% Booster T2 | ||
| Max speed31 of 31 robots publish one | +3.1%+2.8% Unitree G1 | ||
| Sensors31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
Booster T2
Booster T2 is a bipedal humanoid from Booster Robotics, designed in China. Its page publishes 52 of 195 sourced specifications, 27 of them from the maker.
Unitree G1
Unitree G1 is a general availability bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 104 of 195 sourced specifications, 61 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | Booster T2 Booster Robotics 52/195 published | Unitree G1 Unitree Robotics 104/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Reach (values differ) | not published | |
| Arm span (values differ) | not published | |
| Leg length (values differ) | not published | |
| Materials (values differ) | not published |
Joints
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | ||
| DoF head | ||
| Actuator types | ||
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | not published | |
| Encoder type (values differ) | not published | |
| Cooling | ||
| Hollow-shaft cabling (values differ) | not published |
Load
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Fingers per hand (values differ) | ||
| Hand DoF (values differ) | ||
| Hand active DoF (values differ) | not published | |
| Tactile sensing (values differ) | not published | |
| Tactile points (values differ) | not published | |
| Minimum detectable force (values differ) | not published | |
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Swappable end effector |
Mobility
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery | ||
| Navigation (values differ) | not published |
Power
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | ||
| Battery voltage (nominal) | ||
| Battery energy (values differ) | not published | |
| Battery swap (values differ) | not published | |
| Charging method (values differ) | not published | |
| Charge time (values differ) | not published | |
| Charger output voltage (values differ) | not published | |
| Charger output current (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Sensors (values differ) | ||
| Camera FOV (vertical) (values differ) | not published | |
| Depth method (values differ) | not published | |
| LiDAR | ||
| Microphones (values differ) | not published | |
| Speaker power (values differ) | not published |
Compute
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | ||
| AI compute metric (values differ) | ||
| Memory (values differ) | not published | |
| Storage (values differ) | not published | |
| Optional compute module (values differ) | not published |
Connectivity
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Wi-Fi | ||
| Bluetooth | ||
| Ethernet ports (values differ) | not published | |
| Aux power outputs (values differ) | not published |
Software
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Robot OS (values differ) | not published | |
| Middleware (values differ) | not published | |
| ROS 2 distros (values differ) | not published | |
| SDK languages (values differ) | not published | |
| SDK link (values differ) | not published | |
| API docs link (values differ) | ||
| Simulation assets (values differ) | ||
| OTA updates (values differ) | not published | |
| Open to developers (values differ) | not published | |
| Mobile app | ||
| Handheld controller (values differ) | not published |
Autonomy
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method | ||
| Multi-robot coordination | ||
| Voice interaction | ||
| Teleoperation interfaces (values differ) | not published |
Safety
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Emergency stop (values differ) | ||
| Safe state on fault (values differ) | not published |
Environment
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| IP rating (values differ) | not published |
Privacy
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Cloud dependency (values differ) | not published | |
| Data generated (values differ) | not published |
Security
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Vulnerability disclosure link (values differ) | not published |
Compliance
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations |
Commercial
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | not published | |
| Warranty (values differ) | not published |
Overview
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Stage (values differ) | not published | |
| Locomotion | ||
| User type (values differ) | ||
| Applications (values differ) | ||
| Announced (values differ) | ||
| Available from (values differ) | ||
| Price status (values differ) | ||
| Designed in | ||
| Made in (values differ) | not published | |
| Generation (values differ) | not published | |
| Predecessor (values differ) | not published | |
| Logo (values differ) | not published |
Organization
| Spec | Booster T2 | Unitree G1 |
|---|---|---|
| Headquarters (values differ) | not published | |
| Founded (values differ) | ||
| Total funding (USD) (values differ) |