Skip to content
Botlero

Corrections

Every value Botlero has stopped publishing is kept, not deleted, with the reason that was recorded when it was withdrawn and a link to the page that published it. Newest first, across every robot.

An entry says a value stopped being published and why. It does not say what replaced it: often nothing did, and where something did, the replacement is on the robot's own page with its source and its date.

367 withdrawn values · 172 recorded reasons · newest 2026-09-27

2026-09-27109 values, 49 reasons · 43 on this page

  1. This is the CHARGER's output, not the battery's maximum: the same quote is already stored correctly as chargerOutputVoltageV (and as chargerOutputCurrentA), and registry.txt:92 chargerOutputVoltageV's own evidence column reads "G1 54". batteryMaxVoltageV's REJECT is "nominal voltage"; a charger rail is further from the key than that.

    2 values · recorded by cleanup-2026-09-27

  2. Not a battery voltage: "XT30UPB-F VBAT 58V/5A" is a row of the G1 developer page's CONNECTOR pinout table — XT30UPB-F is a connector part number and 58V/5A is that connector's rating, not the pack's full-charge voltage. The key's own example is a labelled "Max Voltage" cell.

    2 values · recorded by cleanup-2026-09-27

  3. An ACCESSORY's service document, not the robot's instructions: a "Disassembly and Assembly Guide Manual" for an optional prosthetic / three-fingered dexterous hand (Dex3-1). CLAUDE.md refused the Dex3-1 pages as seeds for the same reason — a separately-sold hand is not the robot.

    • Unitree G1Digital instructions linkhttps://www.unitree.com/images/G1-End%20Prosthetic%20Hand%20Disassembly%20and%20Assembly%20Guide%20Manual.pdfunitree.com
    • Unitree G1Digital instructions linkhttps://www.unitree.com/images/G1-Flagship%20Version%20A%26B%20Terminal%20Three-Fingered%20Dexterous%20Hand%20Dex3-1%20…unitree.com
    • Unitree G1Digital instructions linkhttps://www.unitree.com/images/G1-Flagship%20Version%20C%20End%20Dexterous%20Hand%20Disassembly%20and%20Assembly%20Guid…unitree.com

    3 values · recorded by cleanup-2026-09-27

  4. Not the robot's instructions: "G1-EDU Waist Fastener Installation Manual" is an installation guide for ONE fastener, and it is EDU-specific while the statement carries no variant. The key is the official user manual/instructions, singular, which the same page publishes separately.

    • Unitree G1Digital instructions linkhttps://marketing.unitree.com/article/en/G1/Lumbar_fasteners.htmlunitree.com

    1 value · recorded by cleanup-2026-09-27

  5. Right about the EDU, wrong about the robot it is attached to: the quote/URL places secondary development on the G1 EDU, but the statement carries NO variantId, so it renders on the base G1 tab too — where Unitree's own two-column table on www.unitree.com/g1 prints "/" (not supported) against the EDU's "YES". The row's REJECT is "a different variant".

    3 values · recorded by cleanup-2026-09-27

  6. Applies an EDU-only capability to the base robot: the page names no variant, so the statement carries no variantId and renders on the base G1 tab, where Unitree's own two-column table on www.unitree.com/g1 prints "/" (not supported) against the EDU's "YES". The row's REJECT is "a different variant".

    7 values · recorded by cleanup-2026-09-27

  7. A truncated fragment, not a value: the support.unitree.com on-board-computer table clips every cell at 20 characters ("development computin", "graphic memory Memor"), so the real cell "1024 NVIDIA Ampere architecture CUDA cores" is stored as the mid-word string "1024 NVIDIA Ampere a". It is also a GPU core count, not the "main onboard computer hardware (CPU/GPU/SoC board)" the key asks for.

    2 values · recorded by cleanup-2026-09-27

  8. this run's pages did not restate it; the row is kept rather than dropped

    21 values · recorded by pipeline

  9. exclusive family "load": the same quote on the same page proves ratedLoadKg more specifically

    2 values · recorded by pipeline

2026-09-24178 values, 45 reasons · 125 on this page

  1. source page is the previous Digit generation: robotoverflow.com/en/robot-database/agility-digit/ states 175 cm / 65 kg / 28 DoF / 8 h / 2:1 where Agility's own Digit 5 release states 1.81 m / 129 kg / 90 min / 10:1; the page is now excluded from discovery (robots.json urlExclude)

    29 values · recorded by cleanup-wrong-generation-2026-09-24

  2. exclusive family "country": a bare "Country USA" cell is a country badge and proves designCountryCode, the family default; it says nothing about manufacturing, which this row's own NOT text forbids

    2 values · recorded by cleanup2-2026-09-24

  3. exclusive family "country": "initial US shipments scheduled for 2026." proves availabilityRegions on its own alias; it says nothing about manufacturing, which this row's own NOT text forbids

    1 value · recorded by cleanup2-2026-09-24

  4. the source page is unitree.com/cn/go2/battery — the Go2 quadruped's battery page, not an H1 page; it is excluded from discovery as of 2026-09-24 and will never be re-fetched, so this statement can no longer be re-verified

    2 values · recorded by cleanup2-2026-09-24

  5. exclusive family "country": the same quote proves manufacturingCountryCodes, which the quote names more specifically — "Produced in Hangzhou, Zhejiang, China." states where it is made, not where it was designed

    2 values · recorded by cleanup2-2026-09-24

  6. the source page is unitree.com/cn/go2/battery — the Go2 quadruped's battery page, not a G1 page; it is excluded from discovery as of 2026-09-24 and will never be re-fetched, so this statement can no longer be re-verified

    3 values · recorded by cleanup2-2026-09-24

  7. exclusive family "handdof": the same quote on the same page proves handJointCount more specifically

    4 values · recorded by cleanup-2026-09-24

  8. the pinned gate no longer accepts this quote for reductionRatio

    1 value · recorded by cleanup-2026-09-24

  9. exclusive family "eventdate": the same quote on the same page proves announcedAt more specifically

    2 values · recorded by cleanup-2026-09-24

  10. the pinned gate no longer accepts this quote for handActiveJointCount

    1 value · recorded by cleanup-2026-09-24

  11. the pinned gate no longer accepts this quote for handJointCount

    1 value · recorded by cleanup-2026-09-24

  12. exclusive family "speed": the same quote on the same page proves walkingSpeedMps more specifically

    2 values · recorded by cleanup-2026-09-24

  13. list-subset: the same quote also states UL_2271, UN_38_3, of which this is a subset

    1 value · recorded by cleanup-2026-09-24

  14. list-subset: the same quote also states ALUMINUM, FOAM, PLASTIC, TEXTILE, of which this is a subset

    1 value · recorded by cleanup-2026-09-24

  15. list-subset: the same quote also states FOAM, TEXTILE, of which this is a subset

    4 values · recorded by cleanup-2026-09-24

  16. exclusive family "speed": the same quote on the same page proves maxSpeedMps more specifically

    7 values · recorded by cleanup-2026-09-24

  17. exclusive family "load": the same quote on the same page proves liftLoadKg more specifically

    3 values · recorded by cleanup-2026-09-24

  18. the pinned gate no longer accepts this quote for runToChargeRatio

    1 value · recorded by cleanup-2026-09-24

  19. exclusive family "price": the same quote on the same page proves depositUsd more specifically

    3 values · recorded by cleanup-2026-09-24

  20. list-subset: the same quote also states LOGISTICS, MANUFACTURING, RETAIL, of which this is a subset

    3 values · recorded by cleanup-2026-09-24

  21. list-subset: the same quote also states IMU, STEREO_CAMERA, of which this is a subset

    2 values · recorded by cleanup-2026-09-24

  22. exclusive family "handdof": the same quote on the same page proves handActiveJointCount more specifically

    1 value · recorded by cleanup-2026-09-24

  23. no other live statement fills this key; the key goes empty (UX rule 1). Judged per key in the report.

    5 values · recorded by cleanup-2026-09-24

  24. an identical value is also stored from a source that is not excluded — closing this loses nothing.

    30 values · recorded by cleanup-2026-09-24

  25. Digit 5 publishes Digit 4; this is the pre-Digit-5 machine's figure.

    1 value · recorded by cleanup-2026-09-24

  26. exclusive family "load": the same quote on the same page proves ratedLoadKg more specifically

    7 values · recorded by cleanup-2026-09-24

  27. Digit 5 publishes 23; this is the pre-Digit-5 machine's figure.

    4 values · recorded by cleanup-2026-09-24

  28. exclusive family "reach": the same quote on the same page proves reachM more specifically

    2 values · recorded by cleanup-2026-09-24

40 reasons per page. A robot's own withdrawals are listed on its page, under “Corrected values”. How a value gets published.