Skip to content
Botlero

Corrections

Every value Botlero has stopped publishing is kept, not deleted, with the reason that was recorded when it was withdrawn and a link to the page that published it. Newest first, across every robot.

An entry says a value stopped being published and why. It does not say what replaced it: often nothing did, and where something did, the replacement is on the robot's own page with its source and its date.

367 withdrawn values · 172 recorded reasons · newest 2026-09-27

2026-09-24178 values, 45 reasons · 53 on this page

  1. list-subset: the same quote also states ALUMINUM, COMPOSITE, of which this is a subset

    1 value · recorded by cleanup-2026-09-24

  2. Digit 5 publishes 9; this is the pre-Digit-5 machine's figure.

    2 values · recorded by cleanup-2026-09-24

  3. the key keeps other sources; this particular value is only attested for the earlier generation.

    1 value · recorded by cleanup-2026-09-24

  4. Digit 5 publishes 30; this is the pre-Digit-5 machine's figure.

    1 value · recorded by cleanup-2026-09-24

  5. Digit 5 publishes 2026-09-15; this is the pre-Digit-5 machine's figure.

    2 values · recorded by cleanup-2026-09-24

  6. Digit 5 publishes 90; this is the pre-Digit-5 machine's figure.

    4 values · recorded by cleanup-2026-09-24

  7. Digit 5 publishes CYCLOIDAL; this is the pre-Digit-5 machine's figure.

    1 value · recorded by cleanup-2026-09-24

  8. Digit 5 publishes 129; this is the pre-Digit-5 machine's figure.

    2 values · recorded by cleanup-2026-09-24

  9. Digit 5 publishes 181; this is the pre-Digit-5 machine's figure.

    2 values · recorded by cleanup-2026-09-24

  10. Digit 5 publishes 2027; this is the pre-Digit-5 machine's figure.

    1 value · recorded by cleanup-2026-09-24

  11. Digit 5 publishes NVIDIA IGX Thor; this is the pre-Digit-5 machine's figure.

    1 value · recorded by cleanup-2026-09-24

  12. Digit 5 publishes 5; this is the pre-Digit-5 machine's figure.

    1 value · recorded by cleanup-2026-09-24

  13. the pinned gate no longer accepts this quote for fallRecovery

    1 value · recorded by cleanup-2026-09-24

  14. the quote is a row of the `# Thor Backpack Specifications` table (a detachable accessory sold separately: 'This accessory is based on the Jetson Thor', 460 chars below the heading). The robot's own compute is in the '## On-board computer' table on the same page: Jetson Orin NX, 16G memory, 2T storage.

    3 values · recorded by cleanup-2026-09-24

  15. today's gate rejects this quote (text:concept-not-in-quote)

    1 value · recorded by regate-after-4dcbade:2026-09-24

  16. today's gate rejects this quote (bool:concept-not-in-quote)

    2 values · recorded by regate-after-4dcbade:2026-09-24

  17. today's gate rejects this quote (closed 2026-09-24; the ChangeLog row was lost to a missing required field)

    27 values · recorded by regate-after-4dcbade:2026-09-24

2026-09-2377 values, 75 reasons · 23 on this page

  1. audit cleanup: third-party-url — humanoid-robots.io's Webflow CDN copy. All three H1 logo statements are directory re-hosts, so Robot.logoUrl goes NULL for H1. Organization.logoUrl is unaffected: store.ts writes 'logoUrl: d.columns.logoUrl ?? org.logoUrl'.

    1 value · recorded by audit-cleanup:2026-09-23

  2. audit cleanup: third-party-url — humanoid.guide's own re-upload; the filename itself is 'Unitree-logo-humanoid-guide.webp'.

    1 value · recorded by audit-cleanup:2026-09-23

  3. audit cleanup: third-party-url — aparobot's Webflow CDN copy — and this one IS Robot.logoUrl on the live H1 page.

    • Unitree H1Logohttps://cdn.prod.website-files.com/67e2a642c1cc92a3140c2707/67e6e5a19082776d20e74805_Unitree%5B1%5D.svgaparobot.com

    1 value · recorded by audit-cleanup:2026-09-23

  4. audit cleanup: subject-mismatch — Unitree's own two-column H1 / H1-2 table: 'Arm normal load | / | Peak: About 21Kg; Rated: About 7Kg'. Two defects: (a) registry limitingLoadKg NOT 'a value per arm … this key is the WHOLE robot (use loadPerArmKg)'; (b) the H1 column is '/', so 21 kg belongs to the H1-2 column, and the statement carries variantId=null. Close together with its CN twin T1 — otherwise the identical value stays live.

    1 value · recorded by audit-cleanup:2026-09-23

  5. audit cleanup: twin of a listed defect — CN twin of #11, not in the cleanup list. Verified live: active, rank PREFERRED, source VENDOR, variantId=null. Page context shows the identical two-column layout: '* 手臂常规负载 / "/" / 峰值：约21Kg；额定：约7Kg' — the H1 column is '/' and 21 kg is the H1-2 column, and 手臂 means arm. Same two defects as #11: registry limitingLoadKg NOT 'a value per arm … this key is the WHOLE robot (use loadPerArmKg)', and wrong

    1 value · recorded by audit-cleanup:2026-09-23

  6. audit cleanup: subject-mismatch — Same row, English page.

    1 value · recorded by audit-cleanup:2026-09-23

  7. audit cleanup: subject-mismatch — Same table: 'Thigh and Calf Length | 400mm × 2 | 400mm × 2'. Thigh 400 + calf 400 = 800 mm; a 400 mm total leg is impossible on a 1520 mm robot. registry legLengthMm ACCEPT: 'total leg length, or thigh + calf given as one number'; NOT: 'a single segment unless the page names it as leg length'.

    1 value · recorded by audit-cleanup:2026-09-23

  8. audit cleanup: subject-mismatch — aparobot's Intro paragraph copies the vendor: 'with thigh and calf lengths of 400 mm each' — 'each' makes it per-segment explicitly. Same NOT clause as #19.

    1 value · recorded by audit-cleanup:2026-09-23

  9. audit cleanup: subject-mismatch — Same row on the English page (unitree.com/h1). Same reasoning.

    1 value · recorded by audit-cleanup:2026-09-23

  10. audit cleanup: subject-mismatch — Decisive vendor evidence: the same H1 / H1-2 table row prints 'Total Arm Length | 338mm × 2 | 685mm'. 338 × 2 = 676 ≈ the 685 mm the H1-2 column prints as ONE number, so '× 2' means two segments, not two arms. Stored 338 is half an arm. registry armLengthMm ACCEPT: 'length of one arm'.

    1 value · recorded by audit-cleanup:2026-09-23

  11. audit cleanup: subject-mismatch — DISAGREE with 'review' — close it. Same aparobot sentence: '… and arm lengths of 338 mm', a re-copy of Unitree's '338mm × 2'. If #17/#18 close and this stays, armLengthMm would render 338 mm on the live H1 page from a directory alone, with no vendor value left to outrank it: the least-sourced version of the wrong number would be the only one shown. All three go and the key disappears — Unitree pub

    1 value · recorded by audit-cleanup:2026-09-23

  12. audit cleanup: null-marker — In context the quote is humanoid.press's heading 'WHAT IS NOT PUBLISHED' followed by its bullet '- IP rating' (next bullets: '- Payload per arm', '- Thermal management details'). It is an explicit statement that Unitree has NOT published an IP rating, stored as the IP rating. Exact inversion of the source's meaning.

    1 value · recorded by audit-cleanup:2026-09-23

  13. audit cleanup: null-marker — Same table, same marker: 'Ingress protection | N/A'. registry ipRating ACCEPT: 'IP code as printed, with body part if given'; NOT: 'guessing from water resistant'. N/A is not an IP code.

    1 value · recorded by audit-cleanup:2026-09-23

  14. audit cleanup: subject-mismatch — Same, from unitree.com/h1's footer 'Copyright © 2016 - 2025 Yushu Technology Co., Ltd.'. The correct-evidence twin survives (id 6ab361a141bba468e469da0e).

    1 value · recorded by audit-cleanup:2026-09-23

  15. audit cleanup: cross-product — The quote 'Wi-Fi' matches (letters+digits) 'WIFI' inside a Go1 quadruped firmware-update guide: '连接狗的WIFI("Unitree_Go1******")' = connect to the DOG's WiFi, at 192.168.12.1:8080/update_firmware. Nothing on that page concerns H1. registry wifiStandard ACCEPT: 'Wi-Fi standard (plain WIFI only if no version)' — for THIS robot. Four WIFI statements survive from real H1 connectivity rows.

    1 value · recorded by audit-cleanup:2026-09-23

  16. audit cleanup: null-marker — humanoid.guide's H1-2 spec table prints 'Operating system | N/A' in the same column style as 'Ingress protection | N/A' and 'Latency glass to action | N/A' — N/A is that directory's not-published marker, stored as the literal OS name. registry robotOs ACCEPT: 'the robot's operating system as printed'. A null marker is not an OS; UX rule 1 forbids rendering an empty field. Two real OS statements su

    1 value · recorded by audit-cleanup:2026-09-23

  17. audit cleanup: price-basis — 'Typical research price: ~$90,000' — 'Typical' and '~'; a street price, not a list price.

    1 value · recorded by audit-cleanup:2026-09-23

  18. audit cleanup: price-basis — DISAGREE with 'review' — close it. Context shows the quote is the page's own SEO title: 'Unitree H1 / H1-2 Price 2026: $90,000 — Specs & Where to Buy', covering H1 AND H1-2 jointly. I checked Unitree's own pages directly: the strings price / 价格 / 售价 / $<digit> occur ZERO times on unitree.com/h1 and on unitree.com/cn/h1. Unitree publishes no H1 price. This is the same ~$90,000 street price the othe

    1 value · recorded by audit-cleanup:2026-09-23

  19. audit cleanup: price-basis — Same quote, high end.

    1 value · recorded by audit-cleanup:2026-09-23

  20. audit cleanup: price-basis — 'Range: $66,770 – $94,905 depending on vendor and configuration' — registry NOT names this verbatim: 'a used/street price'. Context confirms it sits under humanoid.press's 'Pricing' heading immediately above 'WHAT IS NOT PUBLISHED'.

    1 value · recorded by audit-cleanup:2026-09-23

  21. audit cleanup: price-basis — 'Price USD 112,000 – 150,000' — a range, and the page is originofbots' H1-2 page, a different model, stored with variantId=null.

    1 value · recorded by audit-cleanup:2026-09-23

  22. audit cleanup: price-basis — 'priced under $90,000' is an upper bound stored as a lower bound ('price from').

    1 value · recorded by audit-cleanup:2026-09-23

  23. audit cleanup: price-basis — 'Price $150,000 USD (Approximately)' — the page's own parenthesis says approximately.

    1 value · recorded by audit-cleanup:2026-09-23

40 reasons per page. A robot's own withdrawals are listed on its page, under “Corrected values”. How a value gets published.