AgiBot X1 vs Unitree R1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
AgiBot X1 or Unitree R1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 41 measurements both robots publish, the printed values differ on 30 and are identical on 11.
11 of them are one number against another — AgiBot X1 prints the higher figure on 7, Unitree R1 on 4 — and the other 19 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, AgiBot X1 is 5.7% higher at against Unitree R1's .
On weight, AgiBot X1 is 14% higher at against Unitree R1's .
On degrees of freedom, AgiBot X1 publishes and Unitree R1 .
Unitree R1 has figures its sources state as a bound rather than an exact value, so those gaps are not like-for-like.
AgiBot X1 publishes integrations — — and Unitree R1 does not.
Unitree R1 publishes available from — — and AgiBot X1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 30 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | AgiBot X1 | Unitree R1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +5.7% AgiBot X1 | ||
| Weight31 of 31 robots publish one | +14% AgiBot X1 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | 2.5× Unitree R1 | ||
| Runtime31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
AgiBot X1
AgiBot X1 is a prototype bipedal humanoid from AgiBot, designed in China. Its page publishes 55 of 195 sourced specifications, 3 of them from the maker.
Unitree R1
Unitree R1 is a mass production bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 78 of 195 sourced specifications, 39 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | AgiBot X1 AgiBot 55/195 published | Unitree R1 Unitree Robotics 78/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | not published | |
| Depth (values differ) | not published | |
| Weight (values differ) | ||
| Leg length (values differ) | not published | |
| Arm length (values differ) | not published | |
| Materials (values differ) |
Joints
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg (values differ) | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | not published | |
| DoF head | ||
| Actuator types (values differ) | ||
| Reducer types | ||
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | not published | |
| Encoder type (values differ) | not published | |
| Cooling (values differ) | not published | |
| Hollow-shaft cabling |
Load
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Grip force (values differ) | not published | |
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Swappable end effector (values differ) | not published |
Mobility
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing (values differ) | not published | |
| Fall recovery (values differ) | not published |
Power
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Battery chemistry (values differ) | not published | |
| Battery capacity (values differ) | not published | |
| Battery voltage (nominal) (values differ) | not published | |
| Battery energy (values differ) | not published | |
| Battery swap (values differ) | ||
| Runtime (values differ) |
Perception
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Sensors (values differ) | ||
| Depth method (values differ) | not published | |
| LiDAR (values differ) | ||
| IMU axes (values differ) | not published | |
| Microphones (values differ) | not published |
Compute
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute (values differ) | not published | |
| AI compute metric (values differ) | not published | |
| Optional compute module (values differ) | not published |
Connectivity
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Wi-Fi (values differ) | ||
| Bluetooth (values differ) | not published | |
| Fieldbus ports (values differ) | not published |
Software
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Robot OS | ||
| SDK host OS (values differ) | not published | |
| Middleware (values differ) | not published | |
| SDK languages (values differ) | not published | |
| SDK link (values differ) | not published | |
| API docs link (values differ) | not published | |
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers | ||
| Mobile app | ||
| Handheld controller (values differ) | not published |
Autonomy
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Operating modes (values differ) | ||
| AI learning method (values differ) | ||
| Multi-robot coordination (values differ) | not published | |
| Voice interaction (values differ) | not published | |
| Teleoperation interfaces (values differ) |
Privacy
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Cloud dependency (values differ) | not published | |
| Data generated |
Security
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Vulnerability disclosure link (values differ) |
Compliance
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Digital instructions link (values differ) | not published |
Service
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations (values differ) | not published |
Commercial
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Warranty (values differ) | not published |
Overview
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Stage (values differ) | ||
| Locomotion | ||
| User type (values differ) | ||
| Applications (values differ) | ||
| Announced (values differ) | ||
| Available from (values differ) | not published | |
| Price status (values differ) | ||
| Autonomy claim (values differ) | ||
| Designed in | ||
| Made in | ||
| Generation (values differ) | not published | |
| Logo (values differ) | not published |
Organization
| Spec | AgiBot X1 | Unitree R1 |
|---|---|---|
| Headquarters (values differ) | ||
| Founded | ||
| Employees (values differ) | not published | |
| Total funding (USD) (values differ) | not published |