Unitree G1 vs Unitree R1
One row per spec, aligned across 2 robots. A hatched cell means neither the maker nor the directories we read publish that value.
Unitree G1 or Unitree R1? What the published figures say
assembled from the figures below — no score, no ranking, no winner
Of the 66 measurements both robots publish, the printed values differ on 32 and are identical on 33.
14 of them are one number against another — Unitree G1 prints the higher figure on 8, Unitree R1 on 6 — and the other 18 differ in kind rather than in magnitude: a list, a yes/no, a range, or the same quantity printed in a different unit.
On height, Unitree G1 is 7.3% higher at against Unitree R1's .
On weight, Unitree G1 is 21% higher at against Unitree R1's .
On degrees of freedom, Unitree G1 publishes and Unitree R1 .
Unitree G1 and Unitree R1 have figures their sources state as a bound rather than an exact value, so those gaps are not like-for-like.
On payload per arm both publish , but Unitree R1's source states it as an approximation rather than an exact figure — the same number, stated differently.
Unitree G1 publishes integrations — — and Unitree R1 does not.
Unitree R1 publishes open to developers — — and Unitree G1 does not.
The most important differences
ranked by how much of the catalogue publishes the measurement
The 5 most widely published of the 32 measurements where these two differ — ranked that way because a figure most of the catalogue publishes is one that means the same thing on both sides. Every value carries the source that states it.
| Measurement | Unitree G1 | Unitree R1 | Difference |
|---|---|---|---|
| Height31 of 31 robots publish one | +7.3% Unitree G1 | ||
| Weight31 of 31 robots publish one | +21% Unitree G1 | ||
| Degrees of freedom31 of 31 robots publish one | differs | ||
| Max speed31 of 31 robots publish one | +25% Unitree R1 | ||
| Runtime31 of 31 robots publish one | differs |
What each one is
from each robot's own published columns
Unitree G1
Unitree G1 is a general availability bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 104 of 195 sourced specifications, 61 of them from the maker.
Unitree R1
Unitree R1 is a mass production bipedal humanoid from Unitree Robotics, designed in China. Its page publishes 78 of 195 sourced specifications, 39 of them from the maker.
No value in this table has been independently measured or filed with a regulator — every number is a claim by a maker or by a third-party directory, and the chip on each one says which.
Body
| Spec | Unitree G1 Unitree Robotics 104/195 published | Unitree R1 Unitree Robotics 78/195 published |
|---|---|---|
| Height (values differ) | ||
| Width (values differ) | ||
| Depth (values differ) | ||
| Weight (values differ) | ||
| Reach (values differ) | not published | |
| Arm span (values differ) | not published | |
| Leg length | ||
| Arm length (values differ) | not published | |
| Materials (values differ) |
Joints
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Degrees of freedom (values differ) | ||
| DoF per leg | ||
| DoF per arm (values differ) | ||
| DoF waist (values differ) | ||
| DoF head | ||
| Actuator types | ||
| Reducer types (values differ) | not published | |
| Max joint torque (values differ) | ||
| Joint torque (per joint) (values differ) | ||
| Joint range (per joint) (values differ) | ||
| Encoder type (values differ) | not published | |
| Cooling | ||
| Hollow-shaft cabling |
Load
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Rated payload (values differ) | ||
| Payload per arm (values differ) |
Hands
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Fingers per hand (values differ) | not published | |
| Hand DoF (values differ) | not published | |
| Hand active DoF (values differ) | not published | |
| Tactile sensing (values differ) | not published | |
| Tactile points (values differ) | not published | |
| Minimum detectable force (values differ) | not published | |
| Hand grasp load (values differ) | not published | |
| Hand sensors (values differ) | not published | |
| Swappable end effector |
Mobility
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Walking speed (values differ) | ||
| Max speed (values differ) | ||
| Stair climbing | ||
| Fall recovery | ||
| Navigation (values differ) | not published |
Power
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Battery chemistry | ||
| Battery capacity (values differ) | ||
| Battery voltage (nominal) (values differ) | not published | |
| Battery energy (values differ) | ||
| Battery swap | ||
| Charging method (values differ) | not published | |
| Charge time (values differ) | not published | |
| Charger output voltage (values differ) | not published | |
| Charger output current (values differ) | not published | |
| Runtime (values differ) |
Perception
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Sensors (values differ) | ||
| Camera FOV (vertical) (values differ) | not published | |
| Depth method | ||
| LiDAR (values differ) | ||
| IMU axes (values differ) | not published | |
| Microphones | ||
| Speaker power (values differ) | not published |
Compute
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Compute (values differ) | ||
| AI compute | ||
| AI compute metric | ||
| Memory (values differ) | not published | |
| Storage (values differ) | not published | |
| Optional compute module (values differ) |
Connectivity
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Wi-Fi | ||
| Bluetooth | ||
| Ethernet ports (values differ) | not published | |
| Aux power outputs (values differ) | not published |
Software
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Robot OS (values differ) | ||
| Middleware | ||
| ROS 2 distros (values differ) | not published | |
| SDK languages (values differ) | ||
| SDK link | ||
| API docs link (values differ) | ||
| Simulation assets (values differ) | ||
| OTA updates | ||
| Open to developers (values differ) | not published | |
| Mobile app | ||
| Handheld controller |
Autonomy
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Operating modes | ||
| AI learning method (values differ) | ||
| Multi-robot coordination | ||
| Voice interaction | ||
| Teleoperation interfaces |
Safety
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Emergency stop (values differ) | not published |
Environment
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| IP rating (values differ) | not published |
Privacy
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Cloud dependency (values differ) | not published | |
| Data generated (values differ) |
Security
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Vulnerability disclosure link |
Compliance
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Digital instructions link (values differ) |
Service
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Field-replaceable modules (values differ) | not published | |
| Integrations (values differ) | not published |
Commercial
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Price from (USD) (values differ) | ||
| Sold in (values differ) | not published | |
| Warranty (values differ) |
Overview
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Stage | ||
| Locomotion | ||
| User type | ||
| Applications | ||
| Announced (values differ) | ||
| Available from (values differ) | ||
| Price status | ||
| Autonomy claim (values differ) | not published | |
| Designed in | ||
| Made in | ||
| Generation (values differ) | ||
| Predecessor (values differ) | not published | |
| Logo (values differ) | not published |
Organization
| Spec | Unitree G1 | Unitree R1 |
|---|---|---|
| Headquarters | ||
| Founded | ||
| Employees (values differ) | not published | |
| Total funding (USD) |